Toshiba SD-V593SU Owner's Manual page 31

To ADD/DELETE channels
1
Repeat the step 1 on page 30. Then press SET + or
– to select the "ADD/DELETE" and press ENTER.
2
To Add or Delete desired channels
1) Press Direct channel selection buttons (0–9)
2) To add channels
3) Repeat 1) to 2) to add or delete other channel.
3
Press VCR MENU until the menu screen is
cleared.
2F90201A (E)p29-34
Downloaded From Disc-Player.com Toshiba Manuals
CH SETUP
TV
AUTO CH MEMORY
ADD/DELETE
+/Ð/ENTER/MENU
or SET +/– to select a channel number you want
to add or delete.
Press ENTER until "ADD" appears on the screen.
To delete channels
Press ENTER until "DELETE" appears on the
screen. The channel number will blink
ADD
+/Ð/0Ð9/ENTER/MENU
31
Noise elimination
When you don't want to receive a weak signal broadcast, a Blue
back screen can be obtained by selecting the NO NOISE BACK-
GROUND "ON". When the unit is shipped from the factory, the
NO NOISE BACKGROUND is set to "ON".
1
Repeat the steps 1~2 on page 29 and press SET
CABLE
+ or – to select "NO NOISE BACKGROUND".
2
Press ENTER to select "ON" or "OFF" position.
3
Press VCR MENU until the menu screen is
CH 003
cleared.
0–9
ENTER
SET +/–
VCR MENU
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENU
〈 〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
+/-/ENTER/MENU
〈 〉
4/4/05, 9:02 PM
31