Replacing The Disposal Bag - Nilfisk-ALTO ATTIX 40-0M PC TYPE 22 Operating Instructions Manual

Hide thumbs Also See for ATTIX 40-0M PC TYPE 22:
Table of Contents

Advertisement

ATTIX 40-0M PC TYPE 22
english
7.2.2 Replacing the disposal
bag
During the following work, en-
sure that dust is not unnecessarily
spread around. Wear a P2 breath-
ing mask.
Never use the vacuum cleaner with-
out a filter.
16
A
B
D
C
E
A
1. Switch
off
cleaner and pull the mains
plug out of the socket.
2. Open
ing clamps (A) and re-
A
move the upper section
of
the
vacuum
Removing the disposal bag:
3. Close the disposal bag with
string (B).
4. Carefully remove the filter
bag connection from the in-
let fitting (C).
5. Close the disposal bag con-
nection (D) with the slider.
6. Dispose of the disposal bag
in accordance with legal
regulations.
Inserting the disposal bag:
7. Clean the dirt tank.
8. Insert the disposal bag into
the dirt tank.
9. Check that the ventilation
holes (E) remain inside the
dirt tank.
10. Press the bush of the new
filter bag firmly on to the in-
let fitting.
11. Fold the top edge of the
disposal bag over the rim of
the dirt tank.
12. Attach the upper section of
the vacuum cleaner.
13. Close the retaining clamps
(A). Ensure that the retain-
ing clamps fit properly.
A
the
vacuum
the
retain-
cleaner.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents