3. Click the icon for the finger that you want to enroll, and constantly swipe your corresponding finger
across the fingerprint reader until the enrollment completes. For more information, see "Swiping your
finger over the fingerprint reader" on page 70.
4. Click Finish. Your fingerprint is enrolled successfully.
Note: It is recommended that you enroll more than one fingerprint in case of any injuries to your fingers.
Swiping your finger over the fingerprint reader
To swipe your finger over the fingerprint reader, do the following:
1. Placethe top joint of your fingeron the sensor.
2. Apply light pressure and swipe your finger toward youacross the reader in one smooth motion. Do not
lift your finger when you are swiping it.
70
User Guide