Morphy Richards Power SteamPro User Manual page 11

RN330009MUK Rev2_Instruction Book 11/12/2013 14:57 Page 11
Steam cleaning floors (certain models only) (continued)
Attach the micro-fibre floor cloth
floorhead attachment (52), securing it in place by
tightening the toggle (54).
To allow easy manoeuvring around the floor, rest
the steam generator main body
wheeled floor base (56).
NOTE: The wheeled floor base is designed to
make it easier to move the steam generator
across the floor when using the floorhead
attachment and is intentionally a loose fit on the
steam generator.
5
(55) to the If cleaning carpet, rest the floorhead attachment
(52) with the micro-fibre floor cloth
into the carpet glider
move the floorhead attachment across the
carpet.
NOTE: The carpet glider is designed to make it
easier to move the floorhead across the carpet
and is intentionally a loose fit on the floorhead.
7
Fill the water tank (1). Reconnect the appliance
(16) into the to the mains supply outlet. Turn the product on
and select the steam level as described in steps
3, 4 and 6 of 'Using the steam generator for
steam ironing', page 7.
Ensure the jet nozzle child lock
unlocked position, this will allow you to use the
jet nozzle steam trigger
as required.
When you have finished steaming, turn off the
appliance as described in step 7 of 'Using the
steam generator for steam ironing', page 7.
6
(55) attached
(53) to make it easier to
8
(36) is in the
(37) to produce steam
11