Hitachi CP-AX2503 User Manual page 24

2. Connection to the network
Item
WIRELESS
SETUP
(continued)
(continued on next page)
24
connection is in progress.
The keys other than Reset button are not
The connection process is interrupted when
pressing the Reset button.
The OSD below is displayed when the connection
process is complete.
The message below is displayed when the
connection is not established correctly.
SSID SCAN
LIST
(continued)
changed when encryption lock is enabled
in Network Settings – Wireless Setup in
Projector Web Control. Refer to Encryption
encryption, and Shared Key Authentication
is not supported. The authentication with an
access point is succeeded and it is regarded
that the connection is established normally
due to Open System Authentication, but data
cannot actually be transmitted.
(
connection is complete.
Description
The OSD below is displayed while the
NOTE
Encryption settings cannot be
41)
The icon indicating the connection status
Connection succeeded
Connection failed