Advertisement
7
Connecting remote inputs
Telephone
The Audio/Pots connection allows to connect a Pots line to
call paging to selected zones. The Pots input automatically
answers calls and starts paging to the selected zones. On call
drop the zones return to their previous state. Connect A and B
from the Pots line to the Audio/Pots connection
Roomcombining
Remote connections 1, 2 and 3 are assigned to the roomcombining groups 1, 2 and
3. By shorting the two contacts, the logic becomes active. Configuring the
roomcombining groups can be found in the configuration chapter.
Priority audio
Priority audio can be connected to the Audio/Pots input. When using a logic trigger
remote input 4 must be connected. By shorting remote input 4 the audio input
becomes active. The audio input can also be activated by audio detections. How to
configure this can be found in the configuration chapter..
System mute
Remote input 5 can be connected to act as system mute for emergency use. The
input can be set to normal open or normal close.
Logic IO
Through the logic I/O pacing can be externally activated or read
out. This making external signalling or external paging possible.
The I/O can be set to act on paging groups 1...8 or 9...16.
SUB-D 25 aansluitingen:
1
2
3
4
5
6
7
8
9
10 In 7
11 In 8
12 Gnd
13 Gnd
Gnd
Gnd
14 Gnd
In 1
15 Out 1
In 2
16 Out 2
In 3
17 Out 3
In 4
18 Out 4
+24V in
19 +24V in
In 5
20 +24V in
In 6
21 Out 5
22 Out 6
23 Out 7
24 Out 8
25 Gnd
MusiCall Installation manual
V14360903
EN
Advertisement
