Nokia 6730 classic Service Manual page 13

7) Protect the A-COVER ASSEMBLY window with
protective film. Carefully wedge the SRT-6 tool
between the A-COVER ASSEMBLY and the B-COVER.
8b) Release the clips carefully from all sides.
10) Unscrew the five 1.6 x 4.5 REMFORM TORX
PLUS 6IP SCREWS in the order shown. Remove the
screws with tweezers.
13
Issue 1.0
CONFIDENTIAL
Copyright © 2009 NOKIA. All rights reserved.
8a) Work the tool around the A-COVER ASSEMBLY
to release the clips.
9) Remove the A-COVER ASSEMBLY. Do not use this
part again.
11) Protect the LCD with protective film.
Slide the UI SHIELD ASSEMBLY and LIGHT SWAP
PACKAGE lightly as shown to release the clip.
6730 classic RM-547 RM-566
Service Manual Level 1&2