Step 3-Charging Your Io Hawk; Step 4-Safety Gear - Capteq IO HAWK User Manual

A. Battery Indicator: The Green LED light indicates the IO HAWK
is charged >%50, the Yellow LED light indicates the power is under
<50%, the Red LED light indicates the power is down to 10%, when
the LED light becomes red, please recharge the device.
B. Running Indicator: When the operator triggers the rubber foot
mats, the Running Indicator LED will light up, which means that the
system enters the running state; when the system has an error
during operation, the running LED light will turn red and you will
hear the system alert you with a beep.
Step 3: Charging your IO HAWK - Make sure the IO HAWK is fully
charged before your initial use. For charging instructions, please follow
details in Section 8 under Battery and Charging Specifications.
Step 4: Safety Gear - Wear all proper safety gear, including, but not
limited to a helmet, knee pads, elbow pads, and wrist guards.
Helmet
Elbow Pads
Wrist Guards
Knee Pads
7