Remote Control And Special Functions; Remote Controller; Special Functions; Beginner Mode - Capteq IO HAWK User Manual

4. Remote Control and Special Functions

4.1 Remote Control
Please notice in your box the IO HAWK has 2 remote controls; its
maximum operating range is 15 feet (approximately 5 meters).
A. Power OFF (A)Button: When the device is powered
on, press and hold button A for 3 seconds to power off. A
Note- You must press the power button on
the actual device to power the IO HAWK B
back ON.
B. Lock/Unlock (B)Button: While the device is
powered on, click the B button to lock your IO HAWK
(your battery display will turn red, indicating locked mode).
Click the B button again to unlock your IO HAWK (display green/active)
Note- After 10 minutes of no activity, your IO HAWK will
always power itself off to conserve battery.

4.2 Special Functions

A. Beginner Mode: Press and hold the B button for 3 seconds, your
IO HAWK will switch to beginner mode reducing top speed to 3.7mph
(6km/h). You will notice the Running Indicator will begin blinking,
indicating you are operating in beginner mode.
To turn beginner mode off, press and hold the B button on the remote
control for 3 seconds. The blinking Running Indicator light will turn off.
This indicates that your device is back in standard operating mode.
Note- In beginner mode, the governor is set at 3mph,
(6km/h) whereas in standard operating mode, the governor
is set at 6.2mph (10km/h). For your own safety, the IO
HAWK will push back if you attempt to exceed the
governed speed limit.
12