Subscribe to Our Youtube Channel
Related Manuals for Teledex L2S-10 Elite
Summary of Contents for Teledex L2S-10 Elite
- Page 1 D I A M O N D L 2 S - 1 0 Elite & 5 Elite The Teledex two-line, conference telephones specifically designed for the hospitality industry.
- Page 2 INCLUDED IN YOUR PACKAGE Handset Base Coiled Handset Cord Line Cord Clear Plastic Overlay User Guide CONNECTING THE DIAMOND Elite 1. Located on the left side of the Diamond Elite is a modular jack labeled TO HANDSET. Insert one end of the coiled handset cord into this jack (you should hear the coil cord click when properly inserted).
- Page 3 RECEIVING A CALL An audible ring and flickering red LED indicate an inbound call. Using the handset 1. Lift the handset. The Elite will select the ringing line 2. To end the call hang up by replacing the handset. Using the Speakerphone 1.
- Page 4 ADJUSTING THE RING VOLUME Locate the adjustment controls on the back of the telephone labeled RINGER LOW/HI (see diagram on page 6). Slide the switch to the desired LOW or HI ring volume for each line. SPEAKERPHONE TIPS To Activate the handset from speakerphone mode: 1.
- Page 5 REDIAL To redial the last telephone number dialed: Lift the handset or press SPEAKERPHONE key and press REDIAL. HANDSET VOLUME KEY The HANDSET VOLUME key has three levels. When the handset is first lifted, the handset volume is normal. Locate the HANDSET VOLUME key to the right of the keypad. Press the key once and the volume level will increase one level (to med.
- Page 6 6. Insert the top two retaining tabs of the mounting brackets into the mounting bracket slots (located near the middle of the telephone). Then firmly push down to insert the retaining tabs on the opposite side of the mounting bracket. 7.
- Page 7 REQUIREMENTS OF PART 68 - FCC RULES This device has been granted a registration number by the Federal Communications Commission, under Part 68 rules and regulations for direct connection to the telephone lines. In order to comply with these FCC rules, the following instructions must be carefully read and applicable portions followed completely: 1.
Need help?
Do you have a question about the L2S-10 Elite and is the answer not in the manual?
Questions and answers