Table of Contents
Advertisement
MENU OPERATIONS
C. VCR SCART Type
Select the VCR SCART type either Standard or External A/V. In case of External A/V,
the source of TV SCART Output will be selected between VCR SCART input and
internal AV by pressing
button on the RCU. In case of Standard, it will be done
automatically by the SCART functionality.
D. TV Aspect Ratio
Select your TV screen format. Select 4:3 or 16:9 mode by using
,
buttons.
E. 16:9 Display Format
If you have a TV set with the 4:3 picture format and transmission is in 16:9, you can
select the display format. Select the Letter Box or Center extract by using
,
buttons.
F. Sound Mode
It allows you to configure the sound mode. Select the Stereo, Mono, Left and Right
mode by using
,
buttons. The Sound mode is configurable later on by using
button on your RCU.
G. UHF Type
When the PVR is connected to the TV by an RF cable, you may need to select the
correct TV standard system. Select the PAL G, PAL I, PAL K mode by using
,
buttons.
H. UHF Channel
Select a UHF channel by using
,
buttons. The default UHF channel is CH36.
When you change the UHF channel number, you must also change to the same value
on the TV. If you do not, there will be no picture and sound.
23
Hide quick links:
Advertisement
Table of Contents
