Table of Contents
Advertisement
Pairing the Wi USB AudioLink with Receiver
Before using the Wi AudioLink Ui, you will need to pair the Wi USB AudioLink
Transmitter with the Wi AudioLink Receiver. Pairing will allow a connection
between the Transmitter and the Receiver.
1.
First turn ON the Receiver by pressing and holding the
v
POWER button
2.
Press and hold the LINK button
The Power/Status green LED
The Receiver is now in a Pairing mode and ready to search for Transmitter.
3.
Press and hold the LINK button
The Power/Status green LED
4.
Once the Transmitter pairs with Receiver, the Power/Status LED on
both devices will turn to solid green.
5.
The Wi AudioLink Ui Transmitter and Receiver are now ready for use.
for 2 seconds.
z
on the Receiver for 3 seconds.
w
on the Receiver will start flashing.
l
on the Transmitter for 3 seconds.
k
on the receiver will flash momentarily.
Wi AudioLink Ui
WI USB AUDIOLINK PAIRING
z
w
k
l
v
17
Advertisement
Table of Contents
