Wi Digital Systems JM-WALUi User Manual page 15

Windows 7/Vista/XP Optional Settings
1. Setting the Wi USB AudioLink as your default audio device
To set the Wi USB AudioLink as your default device for sound playback and recording, or to change its
settings, click the Start button, click Control Panel and then click Sound. Under the Playback and Recording
tabs, you can select the Wi USB AudioLink from the menus and use the Set Default button to set it as the
default device.
2. Setting the Wi USB AudioLink MIC gain
To set the gain of the microphone when using the Wi USB AudioLink with the Wi AudioLink Receiver, click the
Volume button in the Sound recording section. It will say "Wi USB AudioLink" in the status bar at the bottom.
Moving the slider will adjust the microphone gain.
Wi AudioLink Ui
WI USB PC CONNECTION
15