Advertisement
Quick Links
Model XMCA-SS
Instruction Manual for Meat Grinder
For Service on Your Meat Grinder
1. Visit our website at www.globefoodequip.com
2. Or call the Globe Service Department at 937-299-8625 and ask for contact
information for your local service company.
- IMPORTANT SAFETY NOTICE -
This manual contains important safety instructions which
must be strictly followed when using this equipment.
Visit our website for information on additional products available from Globe.
www.globefoodequip.com
Slicers, Mixers, Countertop Cooking Equipment, Meat Choppers & Scales
WARRANTY REGISTRATION
SCAN THE QR CODE WITH YOUR MOBILE DEVICE OR GO TO
WWW.GLOBEFOODEQUIP.COM
TO FILL OUT AND SUBMIT YOUR WARRANTY REGISTRATION.
www.globefoodequip.com/support/warranty-registration-form
XMCA-SS
Model #:
Serial #:
Advertisement
Related Manuals for Globe XMCA-SS
Summary of Contents for Globe XMCA-SS
- Page 1 XMCA-SS For Service on Your Meat Grinder 1. Visit our website at www.globefoodequip.com 2. Or call the Globe Service Department at 937-299-8625 and ask for contact information for your local service company. - IMPORTANT SAFETY NOTICE - This manual contains important safety instructions which must be strictly followed when using this equipment.
-
Page 3: Table Of Contents
LIMITED MEAT GRINDER WARRANTY ......................12 GLOBE FOOD EQUIPMENT COMPANY 2153 DRYDEN RD DAYTON, OH 45439 PHONE: 937-299-5493 TOLL FREE: 800-347-5423 FAX: 937-299-8623 E-MAIL: info@globefoodequip.com WEBSITE: www.globefoodequip.com © Globe Food Equipment Company, 2014 Printed in USA Updated 11/04/2014 Ver 0_Rev. -... -
Page 4: Attention Owners And Operators
If your meat grinder or any of its parts, is damaged or broken, it may become more difficult to properly clean and sanitize the unit. If your chopper is damaged or needs repair, contact an experienced service individual immediately to ensure the meat grinder can be properly sanitized. If you have any questions, please contact Globe at 937-299-5493. -
Page 5: Operating Instructions
OPERATING INSTRUCTIONS TO AVOID SERIOUS PERSONAL INJURY TO YOUR OPERATORS AND TO YOUR CUSTOMERS: • NEVER OPERATE the grinder without the feed chute and feed pan securely installed. • NEVER put fingers into the feed chute during operation. ONLY USE THE FEED STOMPER, NOT YOUR HAND, to push meat into the meat grinder. -
Page 6: Operating Instructions
OPERATING INSTRUCTIONS TO AVOID SERIOUS PERSONAL INJURY TO YOUR OPERATORS AND TO YOUR CUSTOMERS: • NEVER OPERATE the grinder without the feed chute and feed pan securely installed. • NEVER put fingers into the feed chute during operation. ONLY USE THE FEED STOMPER, NOT YOUR HAND, to push meat into the meat grinder. -
Page 7: Cleaning & Sanitizing
CLEANING & SANITIZING TO AVOID SERIOUS PERSONAL INJURY: • NEVER attempt to clean the grinder while the grinder is installed. • COMPONENTS ARE IMMERSIBLE AND DISH WASHER SAFE. • Dilute detergent per supplier’s instruction. Products containing sodium hypochlorite should not be used on the meat grinder. •... -
Page 8: Cleaning & Sanitizing
NOTE: Do not store the knives and plates while they are still wet. 10. Globe recommends wiping the plates and knives with mineral oil if they are not going to be used immediately. 11. Make sure that all surfaces are dry before reassembling the unit. -
Page 9: Troubleshooting
TROUBLESHOOTING ISSUE CAUSE SOLUTION During grinding the meat Adjusting ring is on too tight. Loosen the adjusting ring. Hand tighten it being discharged is not then rotate the adjusting ring back about smooth or is one inch. in the form of paste. Chopper plate is blocked. -
Page 10: Meat Grinder Accessories
MEAT GRINDER ACCESSORIES ACCESSORIES Part No. Description CP02-12 Chopper Plate, 1/16'' (2mm) CP04-12 Chopper Plate, 5/32'' (4mm) CP06-12 Chopper Plate, 1/4'' (6mm) CP08-12 Chopper Plate, 5/16'' (8mm) CP10-12 Chopper Plate, 3/8'' (10mm) CP12-12 Chopper Plate, 1/2'' (12mm) CP14-12 Chopper Plate, 9/16'' (14mm) CP16-12 Chopper Plate, 5/8'' (16mm) CP18-12... -
Page 12: Limited Meat Grinder Warranty
LIMITED MEAT GRINDER WARRANTY Globe Food Equipment Company (“GFE”) warrants to the original purchaser of new equipment that said equipment, when installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for a period of 1 year on parts (excludes wear/expendable parts). The labor warranty is one year from original installation date or factory shipment date (not to exceed 18 months) whichever date occurs first.
Need help?
Do you have a question about the XMCA-SS and is the answer not in the manual?
Questions and answers