Nosmell Active Charcoal Filter - Miele DA 6296 W Operating And Installation Instructions

Cleaning and care
 Replace the grease filters, making
sure that the locking clips are facing
down towards the cooktop.
 If a grease filter is inadvertently
refitted upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the operating hours
counter for the grease filters
After cleaning, the operating hours
counter needs to be reset.
 Whilst the fan is switched on, press
the operating hours control  for
approx. 3 seconds until only the 1 is
flashing.
The grease filter symbol  goes out.
If the grease filters are cleaned before
the operating hours counter has
reached its maximum:
 Press the operating hours control
 for approx. 6 seconds, until only
the 1 is flashing.
30

NoSmell active charcoal filter

If the rangehood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
This is designed to absorb cooking
odours and is fitted in the canopy
above the grease filters.
Replacement charcoal filters can be
obtained from Miele or via the internet
at www.miele-shop.com (depending on
country). See back cover for contact
details, and "Technical data" for type
and reference number.
Fitting and replacing a charcoal filter
 Before fitting or replacing the
charcoal filter, the grease filters must
first be taken out (see previous
section for instructions on how to do
this).
 Unwrap the charcoal filter from its
packaging.
 Insert the charcoal filter into the back
of the charcoal filter frame, then push
up into the frame at the front.
 Refit the grease filters.
 When fitting for the first time, activate
the operating hours counter (see
"Operation").