Table of Contents
Advertisement
STEP 2 HANDLEBAR ASSEMBLY
STEP 3 FOLD SCOOTER
Place the handlebar set onto the
steering tube in the center. (Note:
the brake lever shall be in the
right) Cover the handlebar with
the stem cap. Screw in the bolts,
adjust proper angle of handlebar,
and then tighten the bolts to
complete the assembly. Make
sure the handlebar cannot be
moved forward or backward but
fixed tightly.
Grasp the steering tube with one
hand tightly, meanwhile unscrew
both of the knobs with the other
hand. Push the handlebar down
to reach the action decks. Wrap
the scooter with the Velcro band
to
complete
(WARNING: Make sure your
fingers are clear of the folding
or pinch point)
6
the
folding.
Advertisement
Table of Contents
