Summary of Contents for Monster 1519
- Page 1 3-WHEELED TRI SCOOTER Model No.:1519 OWNER’S MANUAL Debut Sports & Leisure Ltd Unit 1.9 Paintworks,Bath Road,Bristol BS4 3EH Spareparts helpline:0870 112 1928 Email:helpline@clickspares.co.uk...
-
Page 2: Table Of Contents
INDEX ·IMPORTANT SAFETY NOTICE ………………..…………2 ·SCOOTER PARTS AND COMPONENTS………..………4 ·ASSEMBLY INSTRUCTIION…………………….………5 ·CHECK BEFORE RIDING………………………….………7 ·HOW TO RIDE………………………………….……………7 ·USE GUIDE AND MAINTENANCE…………..…………8 Important: This product and it’s parts comply with the standard EN14619 for users of a maximum weight of 80 kgs NOTE: Any photos of the scooter or decals in the owner’s manual are intended to be as reference mainly, and it may be some different from the real unit you purchase. -
Page 3: Important Safety Notice
Please keep all information for future reference. IMPORTANT SAFETY NOTICE Adult assembly is required. This product must be unfolded and folded by an adult. PRECAUTIONS: Like any other moving products, scooter riding can be a hazardous activity and possible to get into dangerous situations. Be sure to read the entire manual before riding. - Page 4 5. DO NOT make a short or sharp turn when riding the scooter, and DO NOT place your body on the handlebar when making a turn, as the handlebar of the scooter can be twisted, and the scooter may go out of control. 6.
-
Page 5: Scooter Parts And Components
SCOOTER PARTS AND COMPONENTS ... -
Page 6: Assembly Instructiion
ASSEMBLY INSTRUCTION Open the box, and take the scooter unit, wrench, stem cap for handlebar, bolts, and Velcro band from the box. Please check whether all parts and components are complete or not. STEP 1 UNFOLD SCOOTER Grasp the steering tube with one hand,and raise it up to full unfolding,and screw in both of the knobs with the... - Page 7 STEP 2 HANDLEBAR ASSEMBLY Place the handlebar set onto the steering tube in the center. (Note: the brake lever shall be in the right) Cover the handlebar with the stem cap. Screw in the bolts, adjust proper angle of handlebar, and then tighten the bolts to complete the assembly.
-
Page 8: Check Before Riding
CHECK BEFORE RIDING 1. First of all, please make sure the brakes are working. Press the brake lever on the handlebars to ensure brakes are working correctly. 2. Secondly, please check whether the knobs are tightened and the handlebars are sturdy 3. -
Page 9: Use Guide And Maintenance
2. Swing your low body to the right,and then swing to the left. Repeat these actions and then the scooter will move forward easily and continually Step on the scooter Twist your low Twist your low body and hold the handles body to the LEFT to the RIGHT tightly 3. - Page 10 4. In general condition, it is suggested to disassemble and clean the scooter every 6 months, and add lubricant on moving parts.Please make sure the parts specifications are correct with the dealers if some parts can be replaced. 5. If the front fork and wheel or rear support frame and wheels are not fixed tightly, you can use the wrench to tighten the bolts properly,but not too much tensely or loosely.