Table of Contents
Advertisement
How to Use Data and Fax call
Receiving Data or Fax Calls – Single number
If you have a SIM card that does not support separate voice, data
and fax numbers, the phone does not recognize the type of
incoming call.
To use a data or a fax service, make sure that you want to receive a
data or fax call mode. You first have to set the phone to one of
these options in the call mode (Settings ➝ Call Setting ➝ Next
Incoming) sub menu.
To receive a data or fax call
<
1. Press
[Menu] in standby mode.
2. Select the Settings ➝ Call setting ➝ Next Incoming.
3. Select the call type you want (Voice, Data or Fax) and press
[Select].
4. Connect your computer to the phone.
5. After starting the communicate software, accept a call and
receive a data or fax (if it is not answered automatically).
6. After the data or fax reception, you can end the call by just
ending of the communicate software, pressing
Once you have set your phone for a specific incoming call, it
remains set until you change it.
70
Additional Functions
<
E
[End].
Advertisement
Table of Contents
