Play Mode Settings - Archos AV420 User Manual

The Sound Parameters
Parameter
Built-in Speaker
Volume
Bass
Treble
Balance
Bass Boost
Reset button
18.2

Play Mode Settings

If you would like the AV400 to play through an entire folder
of songs, play songs at random (shuffle), or any of the other
playing options, you can set these parameters in the PlayMode
settings. Click on the LEFT function button Setup while listening
to music or via the main menu item Setup and then choose
Playmode.
Parameter
Folder
All
Single
Queue
Scan
Turns on and off the built-in speaker. Same as long press on
the center function button.
00 - 99
10 levels. Decreases or Increases the low frequencies.
10 levels. Decreases or Increases the high frequencies.
10 levels. Favors the right or left channel of the Stereo signal
10 levels. Increases the very low frequencies
Readjusts all settings to their default values
Play all tracks in the current directory or current album
Play all tracks on the AV400
Play a single track then stop
While the current song is playing, click on Navigate, find the
next song you want to play, then click Play. This is your queued
song. You can only queue one song at a time. See the Playlist
section to prepare multiple songs to play. Once the current
track is finished playing, your queued track will be played. If
you do not queue another track at this time, the AV400 will play
the next song in the directory.
Each track in the directory is played for 15 seconds. This allows
a quick sample of each song. If you want to play the whole
song, click on the Play button during those first 15 seconds.
The AV400 will then revert to single directory mode and play
the rest of the songs in the directory without scanning.
Description
Description
61