Baby Max RODEO Instruction Manual page 9

FITTING THE CAR SEAT WITH THE 3-POINT
LAP & DIAGONAL SEAT BELT
Group І / 9-18 kg
Place the child safety seat on the vehicle's seat ensuring it is firmly pressed against the car
seat backrest.
Pull out the car safety belt , pass the lap belt of the passenger seat under the armrest of the
car seat, thread through one of the openings along with the diagonal belt, then through the
plastic backrest, pull the other end and lock in the belt buckle (fig.13). Tighten the lap and
diagonal belt.
To release the seat, follow the above steps in reverse order.
IMPORTANT! Make sure that the passenger seat belt is not twisted and that the fabric
does not impede in any way the movement and / or installation of the safety belt of the passen-
ger seat to the car seat. Belts – of the car seat and the car - should not be twisted, tangled or
pressed by the car door or any other part of the vehicle.
Place the child in the car seat, put shoulder straps, attach the two metal sections of the
buckle connectors together and slot them in the buckle until you hear a "click".
fig. 13
8