Baby Max RODEO Instruction Manual page 10

INSTALLATION OF THE CAR SEAT WITH LOCKING MECHANISM FOR
THE DIAGONAL BELT OF THE PASSENGER SEAT
Group ІІ / 15-25 kg
IMPORTANT! Before installing the car seat on the passenger seat, remove the harness of
the car seat and then install the car seat as described in the instructions!
Place the child safety seat on the vehicle's seat and make sure that it stands firmly. The
backrest of the car seat should rests firmly on the vehicle seat backrest.
Place the child in the car seat.. Pull the seat belt of the car, thread the lap belt under the
armrest, pass through the child's hips and pull the diagonal belt over the child's chest. Pull both
lap and diagonal belts in the other armrest and lock them in the buckle (fig.14). Tighten the lap
and diagonal belt
WARNING! The seat belt should be pulled through the back of the hook.
IMPORTANT! Make sure that the passenger seat belt is not twisted, tangled or pressed by
the car door or any other part of the vehicle, and that the fabric does not impede in any way the
movement and / or installation of safety belts of the passenger seat to the car seat.
To release the child from the seat, unbuckled safety belts.
9
fig. 14