Printing The Nozzle Check Pattern - Canon MG5600 series Online Manual

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.
Note
• If the remaining ink level is low, the nozzle check pattern will not be printed correctly.
tank whose ink is low.
You need to prepare: a sheet of A4 or Letter-sized plain paper
1. Make sure that the power is turned on.
2. Load a sheet of A4 or Letter-sized plain paper in the cassette.
After pushing the cassette back, the paper information registration screen is displayed on the LCD.
Select A4 or Letter for Page size and Plain paper for Type, then press the OK button.
If a message is displayed on the screen, follow the directions in the message to complete registration.
3. Open the paper output tray gently.
4. Print the nozzle check pattern.
1. Select
LCD and Operation Panel
The setup menu screen will appear.
2. Select
The Maintenance screen will appear.
3. Select Print nozzle check pattern, then press the OK button.
Setup on the HOME screen.
Maintenance, then press the OK button.
184
Replace the ink