Table of Contents
Advertisement
IP Controller Board Ethernet Connector LED's
On each of the 2 Ethernet connectors on the IP controller board 2
LEDs are mounted with the same way of operating as a network
switch/router.
With the PoE connector, the status of the green LED will be
that of the orange LED and vice versa.
19
-
Inepro IP Reader (Konica Minolta)
LED
Status
Connection
Green
(or
exists
orange
Connection
PoE)
does not exist
Data is being
transmitted
Orange
(or green
Bad or slow
PoE)
connection
Display
On
Off
Blinking at transmission
speed
Blinking at moderate
speed, modulated on the
data transmission blink
signal
Advertisement
Table of Contents
