Advertisement
Blade Installation & Removal
The door on the side of the Dust Buggy locks
the "shoe" into position and provides access to
the blade nut.
Lay Dust Buggy on to its side. Lift door and
slide "shoe" off towards pointer. Using height
adjustment lever, lower spindle as far as
possible.
The Dust Buggy is
supplied with two (2) large blade flanges.
Make sure to sandwich blade
between them.
Use the spindle lock on the grinder and
supplied wrench to tighten the blade nut.
Raise the spindle, slide the "shoe" back on,
and lower door.
Dust Buggy
Advertisement
