Advertisement
Install pointer as shown
We recommend that the pointer be
adjusted so that it is next to the crack
to be cut, not in it.
This makes it easier to see if one is
cutting straight while keeping the
pointer from being affected by debris in
the crack.
Assembly
Your Dust Buggy requires the installation of the handle and
pointer before it is ready for use.
Install handle as shown
The Dust Buggy handle comes
pre-assembled and simply
needs to be bolted to the rolling
Dust Buggy
Recommended tools:
• Ratchet and Sockets
• Wrench
• Allen Keys
• Pliers
chassis.
Begin with bolting the main
handle to the chassis. Make
sure to place the supplied
opposite to the chassis as
weldment and then thread
Insert the free loop of the
handle spring through the
recommend using a pair of
adjustment mechanism to
bent handle washer
shown.
Follow by removing the
bolt from the clamp
it through the handle
adjustment lever.
hole in the chassis. We
pliers to aid this process.
Cycle the height
ensure that
everything is working
correctly.
Advertisement
