Honeywell Smartronic70 T9275A1002 User Manual page 15

Configuration & Operation
Item
F2 Setting • Press "SELECT" to choose "F2".
(Temperature • Press key
Limit) seconds, the temperature increases continuously until reaches 60
sensor). Press the button one more time to stop the temperature change.
• Press the key
the temperature decreases continuously until reaches 10
Press the button one more time, the temperate change stops.
• Press "ENTER" to save the setting value
Output2 If output2 has no output signal, the screen shows "DO OPEN" and the resistance value is high. Otherwise the
Description screen shows "DO CLOSE" and the resistance value is low.
EC AP MKT
one time, the setting temperature will be 1
one time, setting temperature will be1
Confidential and Proprietary
Operation
0
C up. Press and hold the key more than 2
0
C(internal sensor) or 110
0 C down. Press it and hold more than 2 seconds,
0 C(internal sensor) or -20
0
C(remote
0 C(remote sensor).
Display
Page 15