Ecc Configuration - Asus M3A78 Owner's Manual

Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving.
Configuration options: [Disabled] [Auto]
Channel Interleaving [Disabled]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
MemClk Tristate C3/ATLVID [Disabled]
Allows you to enable or disable MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Allows you to enable or disable memory remapping around memory hole.
Configuration options: [Disabled] [Enabled]
DCT Unganged Mode [Auto]
Allows you to select unganged DRAM mode (64-bit width).
Configuration options: [Auto] [Always]
Power Down Enable [Enabled]
Allows you to enable or disable DDR power down mode.
Configuration options: [Disabled] [Enabled]

ECC Configuration

Advanced
ECC Configuration
ECC Mode
DRAM ECC Enable
DRAM SCRUB REDIRECT
4-Bit ECC Mode
DRAM BG Scrub
Data Cache BG Scrub
L2 Cache BG Scrub
L3 Cache BG Scrub
ECC Mode [Disabled]
Enables or disables the DRAM ECC that allows the hardware to report and
correct memory errors automatically. Configuration options: [Disabled] [Basic]
[Good] [Super] [Max] [User]
Alternate VID [Auto]
Specifies the alternate VID while in low power states. Configuration options:
[1.150V] [1.125V] [1.100V] [1.075V] [1.050V] [1.025V] [1.000V] [0.975V] [0.950V]
[0.925V] [0.900V] [0.875V] [0.850V] [0.825V] [0.800V] [Auto]
ASUS M3A78
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Set the level of ECC
protection. Note:
The 'Super' ECC mode
dynamically sets the
DRAM scrub rate so all
of memory is scrubbed
in 8 hours.
2-25