Connecting and Disconnecting A Shore Power Chord
external receptacle for recharging the boat's batteries .
Use caution when connecting and disconnecting from shore power.
Follow proper connecting and disconnecting procedures otherwise
This procedure connects shore power to a marina dock system.
To connect shore power:
1.
Turn off all breakers at the dock station.
2.
Attach the power cords to the boat receptacle and lock in place.
3.
For safety reasons do not attach the power cord to the dock first.
4.
Plug in the cord at the dock station. Turn on dock station breakers.
5.
Turn ON shore power control breakers located on the engine room firewall.
6.
Check for a reverse polarity indication. If a reverse polarity light illuminates, turn off dock power immediately.
7.
Refer to the Reverse Polarity section for corrective action.
8.
Turn on the boats main AC breakers.
9.
Turn on any boat systems desired, do not exceed 30 amps.
To disconnect from shore power:
1.
Turn off all breakers at the dock station.
2.
Turn off the boat's AC main circuit breaker.
3.
Disconnect the power cord from the dock station.
4.
Disconnect the power cord from the boat.
5.
Retrieve and store the power cord.
6.
Secure the power receptacle on the boat with the waterproof caps.
3-45
With the battery charger option the boat will have an
electrical shock may result.
Never operate the shore power system at less than 105 volts.
Systems
3-45