LG Optimus Zone 2 VS415PP User Manual page 14

The Basics
12
Performing a Hard Reset (Factory Reset)
If your phone does not restore to its original condition after an error or you
forgot your screen lock, perform a Hard Reset (Factory Reset) to initialize it.
WARNING
1. Turn the phone off.
2. Press and hold the Power/Lock key
and the Down Volume key
same time.
3. When the Factory data reset screen appears, release both of the keys.
4. Use the Volume keys
the Power/Lock key
5. Use the Volume keys
Lock key
6. Your phone will perform a factory reset.
To unlock the phone
If you don't use the phone for a while, the screen backlight will turn off to
conserve battery power. To wake up the phone and unlock the screen:
1. Turn the screen on.
Press the Power/Lock key
2. The default Lock screen will appear.
To unlock the screen, swipe your finger across the screen in any
direction.
To use a Swipe Lock screen shortcut, swipe the shortcut icon (at the
bottom of the screen) in any direction. The screen will unlock and
launch the app.
NOTE The default Lock screen simply locks the screen to prevent unintentional actions. For
more security to guard against unauthorized use, you can set an unlock requirement (such
as a pattern, PIN, or password) that will need to be entered to unlock it. Please refer to
Using a Screen Lock on page 11 for more information.
TIP Swipe the left edge of the Lock screen to the right to add a widget to your Lock screen.
If you perform a Hard Reset, all user apps, user data, and DRM licenses will be
deleted. Please remember to backup any important data before performing a Hard
Reset.
to confirm.
to confirm one more time.
(on the right side of the phone)
(on the left side of the phone) at the
to highlight Factory data reset, then press
to highlight Yes, then press the Power/
on the right side of the phone.