Picture Menu - Blaupunkt 40/233I-GB-5B2-FHKUP User Manual

PICTURE MENU

To access this menu, press [MENU] button on the remote control and scroll right.
To enter a menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
Picture Mode
- Choose from the following presets:
Dynamic
Standard
Mild
Personal
Economy
You can make the following adjustments in
Contrast - Switch the balance between black and white.
Brightness - Increase or decrease the brightness of the picture.
Colour - Increases the colour from black and white.
Tint - Lets you increase or decrease the level of tint within the picture
(only available in VGA/PC source mode).
Sharpness - Increase or decrease the sharpness of the picture.
Colour Temperature
Normal
Warm
Cold
Noise Reduction
Off
Low
Middle
High
20
Recommended settings for fast moving pictures
Standard settings
Set to be lighter in colour and less bright
Lets you manually alter all the settings
Power saving mode which reduces the energy used by up to
25% (by reducing the power to the LED/LCD panel).
In Economy mode, the TV will switch itself to Standby mode
after 3-5 hours in the event that the TV buttons or remote
control buttons are not pressed (change the picture mode
to another setting to de-activate this function)
Choose from the following presets:
Default settings
Increases red within the picture
Increases blue within the picture
- Choose from the following presets:
Turns noise reduction off
Minor system adjustment
Medium system adjustments
Maximum system adjustments
Personal mode:
TV Menu Operation
buttons.