Related Manuals for Black & Decker XT
Summary of Contents for Black & Decker XT
- Page 1 11 10 Ireland Australia New Zealand...
- Page 3 36 38 37...
-
Page 6: Safety Instructions
Intended use Maintain tools with care Your Black & Decker mitre saw has been designed for sawing wood and wood products. Keep cutting tools sharp and clean for better and safer performance. Follow the instructions for maintenance and changing accessories. Keep handles and switches dry, clean and free Safety instructions from oil and grease. - Page 7 Labels on tool With the lower guard (14) held in the raised position by the guard bracket screw The following pictograms are shown on the tool: depress the spindle lock button (15) and rotate the blade until the lock engages. While keeping the spindle lock button depressed, loosen and remove the blade screw (31) by turning it clockwise using the spanner (27) supplied.
- Page 8 Make a dry run with the saw switched off and check for clearance. Adjust the fence to Keep both feet firmly on the floor and maintain proper balance. be as close to the blade as practical to provide maximum workpiece support, without As you move the saw arm left and right, follow it and stand slightly to the side of the interfering with the up and down movement of the arm.
- Page 9 Black & Decker XT warranty website within 90 days of You can check the location of your nearest authorised repair agent by contacting your local purchase.
- Page 10 XTS100 44 45 57 60 E14108 WWW.2helpU.com 10 - 01 - 05...
- Page 11 XTS100 130 131 E14109 WWW.2helpU.com 10 - 01 - 05...
- Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. 09 579 7600 81 Hugo Johnston Drive Fax 09 579 8200 Penrose, Auckland, New Zealand United Kingdom Black &...