Channel; Channel Menu - Samsung 650 User Manual

CHANNEL

You can con¿gure various settings for your TV channels with features such as Auto Program, Favorite Channels, and Signal
Strength.
¦

Channel Menu

Antenna Air / Cable
Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).
T
Press the TOOLS button to display the
selecting Tools Switch to Cable
Auto Program
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna
signals
N
When selecting the Cable TV system: Selects the cable system.
systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point
the signal source has been selected.
N
After all the available channels are stored, it starts to remove scrambled channels (Removing scrambled channel). The Auto
program menu then reappears.
N
If you want to stop Auto Programming, press the ENTERE button. The
Select Yes by pressing the
Clear Scrambled Channel
This function is used to ¿lter out scrambled channels after
minutes.
N
To stop searching scrambled channels: Press the ENTERE button to select Stop. Press the
press the ENTERE button.
N
This function is only available in
Channel List
For detailed procedures on using the
O
You can select these options by simply pressing the
Fine Tune (analog channels only)
Use ¿ne tuning to manually adjust a particular channel for optimal reception.
N
If you do not store the fine-tuned channel in memory, adjustments are not saved.
N
'*' will appear next to the name of fine-tuned channels.
N
To reset the fine tuning setting, press the
Tools menu. You can also set the Antenna by
(or Switch to Air).
or button, then press the ENTERE button.
(digital channels only)
Auto Program
Cable mode.
Channel List, refer to the 'Managing Channels' instructions. (see pages 14~15)
CH LIST
button to select Reset, then press the ENTERE button.
English - 13
STD, HRC and IRC identify various types of cable TV
Stop Auto Program?
is completed. This process may take up to 20~30
button on the remote control.
message will be displayed.
button to select Yes, then