Iron-On Transfers - Lexmark Z2300 Series User Manual

Iron-on transfers

Load up to 10 iron-on transfers.
Make sure:
•
You follow the loading instructions that came with the iron-on transfers.
•
The print side of the transfers faces you.
•
The transfers are loaded against the right side of the paper support.
•
The paper guide rests against the left edge of the transfers.
Note: For best results, load transfers one at a time.
Cards
Load up to 25 greeting cards, index cards, photo cards, or postcards.
Make sure:
•
The total thickness of the card stack does not exceed 10 mm (0.4 inches).
•
The print side of the cards faces you.
•
The cards are loaded against the right side of the paper support.
•
The paper guide rests against the left edge of the cards.
Envelopes
Load up to 10 envelopes.
Make sure:
•
The stamp location is in the upper left corner.
•
The print side of the envelopes faces you.
•
The envelopes are loaded against the right side of the paper support.
•
The paper guide rests against the left edge of the envelopes.
Warning—Potential Damage: Do not use envelopes that have metal clasps, string ties, or metal folding bars.
Notes:
•
Do not load envelopes with holes, perforations, cutouts, or deep embossing.
•
Do not use envelopes that have exposed flap adhesive.
Labels
Load up to 25 sheets of labels.
14