HoMedics ME Quick Reference Manual page 6

1. Clean your skin and remove the hair on the surface of the
skin. You may use tweeze, wax, shave, etc. Do not use the
epilator accessory on your face as it is not designed for
facial use.
2. Use white eyeliner to conceal areas that should not be
1
treated such as the edges of your lips and facial moles.
3. Ensure you are in a well lighted area when performing
your treatment.
4. Turn on your
2
base unit, which is Low. Put on the provided eye goggles or
sunglasses.
With A Face Adaptor
5. Remove the accessory protective cap and connect the
face adaptor. The face adaptor will allow the me to emit
4
only single pulses with the desired energy level.
6. Press the
applicator to turn on the applicator. Gently position the
applicator on the area you want to treat. Press once the
activation button to emit a single pulse.
4
7. Reposition the applicator on the next area to be treated
and press the
pulse. Repeat these previous steps until you have covered
the entire facial area. Wait at least 10 seconds before you
treat over the same spot.
5
Without A Face Adaptor
5. Press the
turn on the applicator. Gently position the applicator on
the area you want to treat. Upon contact - a pulse will be
emitted. Remove the applicator after a single pulse.
7
8 EN
device and select the first level on the
cartridge activation button on the
activation button again to emit another
activation button on the applicator to
6. Reposition the applicator on the next area to be treated, another pulse will
be emitted, remove the applicator after a single pulse. Repeat these previous
steps until you have covered the entire facial area. Wait at least 10 seconds
before you treat over the same spot.
Note: Always start with LOW
increase the level for better results
Note: Without the face adaptor the system will emit continuous pulses,
handling must be very cautious and following the instructions
Note: For men it is not advisable to treat the beard as it might create
uneven results, which may produce changes in facial characteristics that
may not be desirable
get your professionally smooth skin
For best results, use me on the same area once a week for the first 7 times.
Performing additional maintenance treatments, after the first 7 treatments, will
help your hair removal results last longer.
1 st week 2 nd week 3 rd week
* If you feel that the hair is too noticeable, you can treat that specific area every 2 days.
When treating the face, use me twice a week for 2 weeks.
Then perform additional treatments every two weeks to help results last longer.
3rd week
4th week
1s t w e e k 2 n d w e e k
treatment durations
For effective results, should be used according to the treatment times indicated
below.
The minimum treatment times recommended below may vary from person to
person. We recommend to see that each treatment area is covered by 2-3 pulses:
level. If you feel comfortable, you may
4 th week 5 th week 6 th week
5th week 7th week
6th week 8th week
as
required
EN 9