Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ssl M325USA
Summary of Contents for Ssl M325USA
-
Page 2: Table Of Contents
CD/MP3/SD/MMC Receiver With Large LCD With Power Level Meter M325USA Installation...............2 Install and remove the front panel........4 Wiring diagram..............5 Control panel layout............6 General operation.............7 Radio operation...............10 CD/MP3 Operations............12 MP3 Operations...............13 Remote control layout............14 Specificaton..............16 Before playing discs............17 Trouble shooting..............18... -
Page 3: Installation
INSTALLATION NOTES ON INSTALLATION Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. - Page 4 INSTALLATION 1. Dashboard 2. Nut (5mm) 3. Spring Washer 4. Screw (5 x 25mm) 5. Screw Fastening the unit to the factory radio mounting bracket: 6. Strap 1. Select a position where the screw Be sure to use the strap to holes of the bracket and the secure the back of the unit in screw holes of the main unit...
-
Page 5: Install And Remove The Front Panel
INSTALL AND REMOVE THE FRONT PANEL INSTALLING THE FRONT PANEL To install the front panel, insert the panel into the housing and make sure the panel Is properly installed, otherwise, abnormalities occurs on the display or some keys will not function properly. DETACHING THE FRONT PANEL REMOVING THE FRONT PANEL Press REL button in the upper left... -
Page 6: Wiring Diagram
WIRING DIAGRAM WIRE CONNECTION NOTE BE SURE THE UNIT IS CONNECTED TO A 12 VOLTS BATTERY WITH NEGATIVE GROUND . THE POSITIVE (+) CABLES MUST BE CONNECTED TO THE POSITIVE (+) BATTERY TERMINAL. THE NEGATIVE CABLE (-) MUST BE CONNECTED TO GROUND/ CHASSIS. -
Page 7: Control Panel Layout
CONTROL PANEL LAYOUT FRONT PANEL LAYOUT... -
Page 8: General Operation
GENERAL OPERATIONS ON/OFF Press POWER button (1) to turn on the unit. Press it again to turn off. FRONT PANEL RELEASE Press REL button (2) to detach the removable front panel. SOUND ADJUSTMENT Turn on (3) can adjust the desired volume quality. A).Press SEL button (3)will change in the following order. -
Page 9: General Operations
GENERAL OPERATIONS OTHERS ADJUSTMENT If you press the Vol/SEL button (3) for several seconds, it will activate a cycling mode of the following functions for user's selection. Press and hold this button to go to DSP Mode. By turning this function button, you will cycle thru Flat, Classic, Pop and Rock. - Page 10 GENERAL OPERATIONS - Tuner (radio) - CD (MP3 CD) to go to this mode must be have a CD in. - Memory Card to go to this mode must be have a Memory Card in. - USB to go to this mode USB device must be connected. - AUX in put DISPLAY Press DISP button (6) to operate each display mode as follow:...
-
Page 11: Radio Operation
RADIO OPERATION MO/ST SELECTOR Press ST(20) button to select MONO or STEREO mode. When “ST” appears in the LCD display. During the Fm receiver mode, press the button to switch mono or stereo. LOC/DX SELECTOR Press LOC(21) button to select strong or weak station reception. It is set to LOC mode when LOC(21) button is first pressed. - Page 12 RADIO OPERATION AUTOMATIC MEMORY STORING & PROGRAM SCANNING - Automatically Store Memory Press AMS(MP3) button (13) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number buttons.
-
Page 13: Cd/Mp3 Operations
CD/MP3 OPERATIONS Press preset button (16): CDP mode : REPEAT ON / OFF is activated. When REPEAT ON, RPT INDICATOR comes on and repeats the existing track. During a REPEAT, DISC- RPT INDICATOR comes on and repeats the current CD. Press preset button (17): During RANDOM ON, RDM INDICATOR is turned on. -
Page 14: Mp3 Operations
MP3 OPERATIONS CHARACTER SEARCH MODE: 1. Press AMS(13) button 3 times, ”CHAR SCH” will show on the display. 2. Press VOL/SEL button (3) once to enter to the “CHAR SCH” mode. 3. When get in to the “CHAR SCH” mode. 4.When characters or numbers are selected, press and hold VOL/SEL button(3) the song will show on the display, press it again to play the song. -
Page 15: Remote Control Layout
REMOTE CONTROL LAYOUT... - Page 16 REMOTE CONTROL LAYOUT REPLACING THE BATTERY When the operational range of the remote control becomes short or non functions while operating. Replace a new CR2025 battery .Make sure you use the correct Battery polarity before replacing 1.Pull out Battery Holder while pressing the stopper 2.Put the button type battery(+)mark upward into the Battery Holder.
-
Page 17: Specificaton
SPECIFICATION GENERAL Power Supply Requirements: DC 14.4V“ ”, Negative Ground Load impedance: 4 ohms Maximum Output Power: 60W x 4(CH) Chassis Dimensions: 178x163x50mm(WxDxH) Current Drain: TONE CONTROLS Bass (at 100Hz): +10dB/-10dB Treble (at 10K): +10dB/-10dB CD Player Signal to Noise Ratio: More than 60dB Channel Separation: More than 60dB... -
Page 18: Before Playing Discs
BEFORE PLAYING DISCS CLEANING THE CD Before playing a CD, wipe it off with a clean, dust-free cleaning cloth. Wipe the disc in the direction of the arrow. Always insert the CD with the label side facing upwards. If the CD is inserted with the printed side facing downwards, the device may be damaged. -
Page 19: Trouble Shooting
TROUBLE SHOOTING Before going through the check list, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. with a 18 18...
Need help?
Do you have a question about the M325USA and is the answer not in the manual?
Questions and answers