Lubricant Specifications - Ford 2005 Escape Owner's Manual

2
Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
3
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick's normal operating range.
4
Add the coolant type originally equipped in your vehicle.
5
Fill to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.
6
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C930-A and the API Certification mark.

LUBRICANT SPECIFICATIONS

Item Ford Part
Name or
equivalent
Body hinges, Multi-Purpose
latches, door Grease
striker plates
and rollers, seat
tracks, fuel filler
door hinge and
spring, primary
and auxiliary
hood latches
Hydraulic clutch Motorcraft High
fluid and brake Performance
fluid DOT 3 Motor
Vehicle Brake
Fluid
Halfshaft CV Motorcraft
joints Constant
Velocity Joint
Grease
2005 Escape (204)
Owners Guide (post-2002-fmt)
USA_English (fus)
Maintenance and Specifications
Ford Part
Number
XG-4 or XL-5
PM-1
XG-5
Ford
Specification
ESB-M1C93-B or
ESR-M1C159-A
ESA-M6C25-A
and DOT 3
WSS-M1C258–A1
279