Table of Contents
Advertisement
" In-call functions
During a call, press © and then ~
(Options) for the following functions
(some of them are network services) :
MutelUnmute, Holdl Unhold, Send
DTMF New call, Answer, Reject,
Swop, End active call, End all calls,
Phone book Send.
Swap switches between the active
call and the call on hold .
If you selected Send DTMF key in a
DTMFstring and press ~(OK).
" Listening to voice
messages
In standby mode, press and hold
to call your voice mailbox . You can
obtain the voice mailbox number
from your service provider.
" Locking the keypad
The keypad lock prevents keys from
being accidentally pressed when, for
example, the phone is in your pocket
or handbag.
To turn the lock on or off: In standby
mode, press (~ and then
quickly.
When the keypad is locked :
The indicator -0 is shown.
You can answer, end or reject a
call in the normal way. During a
call, you can operate the phone as
usual .
8
"
The headset HDC-s can be
used
as
usual.
Note : When the keypad
is
locked, calls may be possible
to the emergency number
programmed into your phone
(112). The number is
displayed only when all the
digits have been keyed in .
" Storing a phone number
In standby mode, press ~ (Menu)
(Phone book is displayed) and then
~(Select) . Scroll to Add nameand
press 0 (Select) . Key in the desired
name (see "Writing text" on page 9)
and press ~-=) (OK) . Key in the area
code and phone number, and press
~(OK) .
Quick save : In standby mode, key in
the phone number. Press O or O
and then Q-
= ) (Save) . Key in the
name and press <~) (OK) .
e two ways to write text :
ive text input and traditional
put.
from text input to standby
press and hold © twice.
atively : Press ~ (Options),
to Exit, and press ~ (OK) .
ictive
text input
ive text input is an easy way to
forexample text messages and
der notes. You only need to
a key once for each letter . To use
s
input method, check that
wn at the top of the display.
switch between predictive and
tional text input, press
O
Ice.
Write the desired word by pressing
each key once for one letter .
For example, to write'Nokia', press
49P 4~~
" The keys ©,
O, O, cO
and
® have the same function as
in traditional text input (see
page 10).
To switch between letter cases,
press ©repeatedly and
check the indicator at the top
of the display . For example, abc
is shown when the lower case
is in use .
To insert a punctuation mark,
press 'm repeatedly.
9
2.
3.
Basic functions
" To insert a special character:
Press and hold (~), scroll to
the desired character, and
press <~) (Use).
" To insert a number, press and
hold the desired number key.
If the displayed word is the one
that you want, press
0
and
start writing the next word .
If you want to change the word,
press ~repeatedly until the
desired word appears .
If the ? character is shown after
the word, you can add the word in
the dictionary : Press 0(Spell),
key in the word using traditional
text input, and press ~ (OK) .
If the text Options is shown above
D, you can access the following
options by pressing this key:
Matches : Shows a list of words
that correspond to your
keypresses . Scroll to the desired
word and press 0 (Use).
Insert word : Allows you to add a
word to the dictionary manually .
Write the word using traditional
text input and press Q~) (OK) .
Insert number : Allows you to key
in numbers by pressing each
number key once .
Insert symbol : Allows you to
select a special character from a
list . Scroll to the desired character
(such as %) and press 0(Use) .
Advertisement
Table of Contents
