Audio Inputs And Levels - Datavideo AD-200 Quick Start Manual

Connection AD-200 main unit and AD-200 control unit
AD-200 Main Unit
Connect Cable
D-SUB Cable
AD-200 Control Unit

Audio Inputs and Levels

There are two kinds of switches under AUDIO IN:
The LINE/ MIC+40dB/ MIC+60dB switch is used to set the audio as LINE in or MIC+40dB or MIC+60dB in. When
LINE in is selected please also set the 48V ON/OFF switch to OFF in order to prevent burn-out damage to the circuit.
The 48V ON/OFF switch is for phantom power. If you want to use MIC in, please set the LINE/ MIC+40dB/ MIC+60dB
switch first, and then if using a Condenser microphone turn ON the 48V ON/OFF switch. If you wish to use a Dynamic
microphone please turn OFF the 48V ON/OFF switch.
*NOTE: Always double check the manual for the microphone being used to see what advice it gives regarding
power as some Mics have internal batteries too.
- 7 -