Table of Contents
Advertisement
5.9 Upgrade Firmware
Open "Upgrade Firmware" in "Management" and follow the steps below to upgrade firmware locally or
remotely through WAP-7500's Web:
Click "Browse" to select the firmware file.
Click "Upload" to load the file into the WAP-7500.
Wait a moment, the system will reboot after successfully upgrade.
Warning:
Do NOT cut the power off during upgrade, otherwise the system may crash!
Upgrading with the wrong firmware will make your device useless. Please carefully
check the firmware before upgrading.
Figure 46 Upgrade Firmware
Page 59
Advertisement
Table of Contents
