n SCSI and DC Power Connector
A combination 50-pin SCSI and 4-pin power connector is used to connect a standard SCSI
cable as well as +12V and +5V power line. Refer to Chapter 2., "SCSI and DC Power
Connector" section for more information.
n GND Terminal
This is the ground terminal of the drive.
Top Panel
n Optional Switches (S501, S502)
These two dip switches allow the user to set drive configuration. Refer to Chapter 2.,
"Optional Switch Setting" section.
14
SMO-F551 Technical Guide and Specifications
Sony Corporation 1998
S501
1 2 3 4 5 6 7 8
S502
1 2 3 4 5 6 7 8
Optional Switch
Fig. 1.5 : Top view
(
)
Rear End of the Drive
ON
OFF
ON
OFF