Line Monitor Circuit - Panasonic UF-580 Technical Manual
Panasonic uf-580; uf-590; uf-780; uf-790; dx-600; dx-800 facsimile
Hide thumbs
Also See for UF-580:
- Service manual (298 pages) ,
- Brochure & specs (4 pages) ,
- Operating instructions manual (158 pages)
Table of Contents
Advertisement
1.1.6
Line Monitor Circuit
The Line Monitor Circuit consist of an operational DAA (The secondary side chip) and its peripheral
circuits. Its function is to monitor the dial tone, DTMF tone, response signals, etc. over the speaker. It also
sounds the output of the key touch tones, alarm tones, etc. from the panel CPU over the speaker. The
Received Signals are output from DAA of Secondary circuit, and through Analog AGC, Electronic Volume,
Amplifier and over the speaker.
The monitor tone from the phone line and the buzzer tone from the panel can be adjusted from the Control
Panel.
Line Monitor Signal
(from AGC Circuit)
Buzzer Clock
(from Control Panel Unit)
Buzzer Tone Switch
(from Output Port)
Ver 2.00
Volume
Control
Circuit
(IC21)
Level Control
Circuit
(Q3)
Line Monitor Circuit
Block Diagram
15
-
(IC20, 2)
+
AGD
(+2.5VDC)
UF-580/590/780/790
DX-600/800
Speaker
Amplifier
(Q4,5)
Speaker
DEC 2003
Advertisement
Table of Contents
