Sound Blaster X7 Controls And Indicators - Creative Sound Blaster X7 SB1580 User Manual

Sound Blaster X7 Controls and Indicators

Different actions can trigger the Sound Blaster X7 to go into different states. The table below lists the
controls and related actions, and the meaning of the LED indications.
Control/
Indicator
Power/Bluetooth
button/indicator
Playback Volume/
Mute knob
SBX button/indicator
Dolby Digital indicator
SBX button/indicator
+
Power/Bluetooth
button/indicator
Playback
Volume/Mute knob
+
SBX button/indicator
+
Power/Bluetooth
button/indicator
Action
Press once
Press again
Press and hold for
2 seconds
Press and hold for
5 seconds
No activity within 15
minutes
Press once
Set volume level to
maximum or minimum
Press once
Press again
Press and hold for 3
seconds
Press and hold for 6
seconds
Play Dolby Digital encoded
audio via Optical-In
Connect mobile device to
USB Host port
Press and hold SBX
button/indicator followed
by Power/Bluetooth
button/indicator
Press and hold in
sequence SBX
button/indicator,
Playback Volume
/Mute knob and
Power/Bluetooth
button/indicator
LED
White
Off
Blue blinking
Blue
Blue (blinks five times
quickly)
Dim
Flashes slowly
Blinks three times
White
Off
Power LED blinks two
times quickly
Power LED blinks five
times quickly
White
White (blinks five times)
Power, SBX and Dolby
Digital LEDs blink five
times quickly
Dolby Digital LED
blinks three times
Troubleshooting and Support - 36 -
Status
Power on
Power off (standby)
Bluetooth pairing
Bluetooth connected
Bluetooth settings reset
Power saving mode
Mute sound
Maximum or minimum
volume
SBX on
SBX off
Voice recognition assistant
triggered
Audio prompts are turned
off
Dolby Digital decoding is
activated
USB Host is ready for audio
streaming
Factory reset
The Bluetooth feature is
disabled permanently.
To reactivate Bluetooth,
perform one of the following
actions:
- Trigger NFC pairing
- Perform a Bluetooth
setting reset*
- Perform a factory reset*
- Remove and plug in power
cable again