Safety Instructions - Moda flame MFE5048 Important Instructions & Operating Manual

【 【 【 【 Safety instructions】 】 】 】
Safety Safety instructions instructions

Safety instructions

Only use the appliance in accordance with the instructions in this manual! It cannot be used for any
other purpose.
Never operate the appliance when the appliance itself or the main cable show any signs of damage.
In order to avoid overheating, do not cover the heater.
Be responsible when handling the packing material. Warning: plastic wrapping may be lethal to children.
Do not place the appliance next to a socket.
Never operate the heater on a program switch, timer switch or any other appliance for automatic
operation.
The heater is only suitable for indoor use.
Never use the heater in the bathroom, shower or near a swimming pool.
The heater must not be located immediately below a socket-outlet
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.
Never leave small children unattended near the appliance.
In case of malfunction, disconnect the plug immediately.
When not in use for a considerable amount of time, unplug the appliance.
Components should only be serviced by an approved electro technician.
【 【 【 【 To switch on】 】 】 】
Plug in the appliance into the socket. Turn on the Power
Switch Switch Panel Panel
The control Switch Switch Panel Panel is under the Vent in front of the fireplace (See
Control Switch Panel
Power Switch
Power Switch Power Switch Switch
(See (See
(See pic)
Power Power Power Switch Power Switch Switch Switch
pic) pic)
pic)
4