Tv Selection And Control - NEC VN-23 User Manual

TV SELECTION AND CONTROL
CAUTION 1) This remote control can operate only some NEC TVs.
2) With the cover of remote control closed, this remote control can control the TV.
3) You can control the TV with the remote control only when performing below procedure.
Point the remote control towards the TV set.
Make sure the main power of the TV set is ON.
2
OPERATE
0
ct)
Press and hold the TV OPERATE button on the remote control.
3
OPERATE
0
0
• CHANNEL •
At the same time press the TV CHANNEL "A" button. Each time this button is
pressed, the "remote code" will be changed. Once the TV set turns on, release
the OPERATE and TV CHANNEL "A" button.
4
Confirm that power of the TV set can be turned on and off by pressing the
OPERATE button.
5
Release the button when the power of the TV is activated.
OPERATE
6 0
TV
(0=
You can control the TV set by pressing the buttons (OPERATE, CHANNEL /A,
VOLUME v/A) of the remote control when the power of the TV set is ON.
• CHANNEL • • VOLUME •
NOTE: This remote control can operate only the following models and "remote code" is preset for the models in group "1"
when shipped from the factory.
1. FS-8010S, FS-6325, FS-6315S, FS-6835S, FS-6850S, FS-5180, N-3450, N-4850, N-3451, N-4851.
FS-6330, FS-6331, FS-6340S, FS-6341S, FS-6860S, FS-6861S.
N-3452, N-3453, N-3461, N-4853, FS-5190.
2. N-3445, N-4845.
3. N-3440, N-3430, N-4830, N-4840
9