Loose Fuel Filler Cap Message; Vehicle Loading - Dodge Caliber 2012 Owner's Manual

WARNING! (Continued)
• Never add fuel when the engine is running. This is
in violation of most state and Federal fire regula-
tions and may cause the MIL to turn on.
• A fire may result if gasoline is pumped into a
portable container that is inside of a vehicle. You
could be burned. Always place gas containers on
the ground while filling.
NOTE:
• When the fuel nozzle "clicks" or shuts off, the fuel
tank is full.
• Tighten the gas cap about 1/4 turn until you hear one
click. This is an indication that cap is properly tight-
ened.
• If the gas cap is not tightened properly, the MIL will
come on. Be sure the gas cap is tightened every time
the vehicle is refueled.

Loose Fuel Filler Cap Message

If the vehicle diagnostic system determines that the fuel
filler cap is loose or improperly installed, a "gASCAP"
message will be displayed in the Odometer/Trip Odom-
eter in the instrument cluster. Refer to "Instrument
Cluster Description" in "Understanding Your Instrument
Panel" for further information. Tighten the fuel filler cap
properly and press the odometer/trip odometer RESET
button to turn the message off. If the problem continues,
the message will appear the next time the vehicle is
started. Refer to "Onboard Diagnostic System" in "Main-
taining Your Vehicle" for further information.

VEHICLE LOADING

As required by National Highway Traffic Safety Admin-
istration regulations, your vehicle has a certification label
affixed to the driver's side door or B-Pillar.
I n f o r m a t i o n P r o v i d e d b y :
STARTING AND OPERATING 369
5