Table of Contents
Advertisement
LED INDICATORS
The LED Indicators will behave differently with each button on the remote control.
Function
LED Behavior
Input
(When searching for device)
Bluetooth
Flash from Left to Right
and back continuously.
Pairing
DTS
TruVolume
On/Off
TruVolume Off
Press the INPUT button on the remote to cycle through the available inputs:
• Analog Audio In - AUX Stereo RCA (1)
• Analog Audio In - AUX Stereo 3.5mm (2)
• Coaxial In - Digital (3)
• Digital Optical Audio In - Optical (4)
• Bluetooth
• USB In - USB (6)
Press and hold the
minutes. You can now search for the Sound Bar (VIZIO SB2920) using your Bluetooth
Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Press the TVOL button to enable/disable TruVolume.
TruVolume On
When enabled (On), TruVolume provides a consistent and comfortable volume level
for a more enjoyable listening experience.
LED Indicators are located here.
Description
button on the remote. The Sound Bar will be discoverable for 15
12
Hide quick links:
Advertisement
Table of Contents
