Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ruegg TAOS
Summary of Contents for ruegg TAOS
- Page 1 Operation Manual Pellet stove TAOS...
-
Page 2: Table Of Contents
Technology______________________________________________________________________________ 5 Ease of use – operational safety _____________________________________________________________ 5 Higest efficiency – Lowest emissions __________________________________________________________ 5 TAOS green in favour of the environment ______________________________________________________ 5 4. Installazione Installing the pellet stove _______________________________________ 6 General instructions _______________________________________________________________________ 6 Electric connection ________________________________________________________________________ 6... - Page 3 INFO Menu ________________________________________________________________________ 17 Supplementary information ________________________________________________________________ 17 6. Operational sequences and automatic safety functions ________________________ 18 7. Error message __________________________________________________________ 19 Error message (traversing on display): _______________________________________________________ 19 Service menu ___________________________________________________________________________ 19 Faults – causes - measures ________________________________________________________________ 20 Cleaning, warranty, service ___________________________________ 21 8.
-
Page 4: Indroduction
Now we would like to wish you a pleasant time with not get any damage due to non-sufficient cleaning your new TAOS pellet stove! Do not process inflammable and explosive General warn and safety... -
Page 5: Specifications For High- Quality Pellets
Technology The state of the art of your new pellet stove is The TAOS pellet stove is optimally suited to be ensured by years of laboratory and practice based refitted with such fine particulate collector by your test series. -
Page 6: Installazione Installing The Pellet Stove
of the parameters by the charged service partner are in most cases charged separately. Ask your service General instructions partner for a service subscription. For levelling of the stove the machine mounts under the device can be adjusted in height and locked Electric connection (counter nut SW13). -
Page 7: Chimney
Connecting the Rüegg room sensor Safety distances Disconnect stove from the power supply before For flammable objects: connecting the multi-pin plug. Subsequently carefully tighten multi-pin plug on board using screws. (Measured from the outside of the stove): -20 cm from the back and the sides -80 cm from the front For non flammable objects: (Measured from the outside of the stove):... -
Page 8: Assembly Dimensions
Assembly dimensions... -
Page 9: Operation
30%. Your TAOS pellet stove can also be operated in fully automatic mode by the thermostat or by selecting the heating time. If you like to use this comfortable mode or want to perform further settings you need to change to advanced operating mode first. -
Page 10: Important Information On How To Use The Menu (Illustrations)
Important information on how to use the menu (illustrations) The illustrations below always depart from the display field in the oval frame. The illustrations in these operating instructions show the display screens and the buttons that have to be pressed in order to access the next screen (in the direction of the arrow). - Page 11 The main menu tree The main menu tree is the departing position for all following illustrations in these operating instructions and all settings for your pellet stove. Instructions on the individual submenus can be found on the following pages below the corresponding number in a circle from this illustration. The main menu tree can only be accessed when in advanced operating mode.
-
Page 12: Changing The Function Mode
Changing the function mode To access this menu item the supplied Rüegg room temperature sensor must be connected. The menu item MODE allows to switch between the function modes HEAT, ROOM and AUTO operation. Any other settings for the selected function mode will be made in different submenus which are described in separate illustrations. -
Page 13: Heating In Auto Mode (Automatic Operation)
Heating in AUTO mode (automatic operation) Heating based on pre-selected heating times and temperatures. Before the AUTO mode can be used the current time and date must be entered. For information on how to do that see page 15, section 3 “Setting time and date“. After the time has been set the heating times can be programmed. -
Page 14: Programming The Heating Times
Programming the heating times You may either program each day individually (DAY) or program the same times for the complete week in a superposed program level (WEEK). In order to shorten the entering process it is recommended to program the complete week and subsequently change individual days, if required (e.g. -
Page 15: Setting Of Time And Date
Setting of time and date Departing point is number from the main menu tree (see page 11) Device settings (Setup) Refer to illustration on following page. Various settings can be made in the menu item SETUP: FROST = activating/deactivating of the frost protection function If the frost protection function is set to “FROST On“... - Page 16 Continued from page15 Departing point is number from main menu tree (see page 11) Frost protection function (on/off) Indoor air fan (on/off for optional indoor air fan GSM setup External release for third party thermostats (on/off) GSM functions (on/off) Text message confirmation or error message to mobile phone (on/off)
-
Page 17: Info Menu
INFO Menu The menu item INFO shows information mainly used by the service partner. Inputs Outputs Parameter Menu Departing point Menu Menu is number from main menu tress Screw conveyor (see page 11) Operating hours Flame temperature Menu Menu Menu Pellet amount fed Feeding interval Room temperatures... -
Page 18: Operational Sequences And Automatic Safety Functions
Overheating Power failure during operation A safety temperature limiter (STB) will stop the stove After a power failure the flame temperature will be automatically when overheated. After cooling down of checked. If the temperature exceeds 300°C the the pellet stove manual reset of the STB is required. device will not attempt to restart but continue the Remove the STB protection cap (see image) and normal operation. -
Page 19: Error Message
Fuel feed of the pellet container is less than 2kg. Check the filling level regularly. The container lid should, IMPORTANT! Avoid contact of pellet bag with the hot however, always be kept closed unless the container stove during fuel feeding! is being filled. -
Page 20: Faults - Causes - Measures
Faults – causes - measures MEASURES PROBLEM/ERROR FAULT DESCRIPTION (Start with first step. If not successful, perform with next DISPLAY step) Check pellet supply and refill pellets, if required (for first start add some pellets manually to the fire pan) “NOT IGNITED“... -
Page 21: Cleaning, Warranty, Service
The pointed opposite part can be used to clear possibly blocked fire pan ventilation holes from the Basic information bottom. Free ventilation holes are essential for a good Pellet stoves are a very convenient kind of wood combustion! burning appliances, but as with every wood burning stove, needs a regular cleaning. -
Page 22: Small Service Procedure
Remove the butterfly screws on the two flue gas duct covers on the top of the sides and on the radiation cover. (see arrows) For TAOS I and TAOS II the front plate can be removed by subsequently removing the visible screws. - Page 23 Use long-handle cleaning brush to clean flue gas however, we recommend a shorter cleaning interval. passes on the combustion chamber side. (Rüegg item (approximately every 3 months). The heating flue is no. 52.57.00510) located in the bottom of the combustion chamber. Procedure: Remove front plate (see cleaning exhaust ducts) Remove cover plate of revision opening by...
-
Page 24: Service Procedure
Checking the chimney connection Inspect and clean the connection. The collected flue dust can have a negative effect on the stove performance and represent a safety risk. Part of the ash remaining in the flue fan can be removed using a vacuum cleaner after removing the stove pipe without demounting the flue fan. -
Page 25: Options, Accessories And Parts
(to green strap plug) and use it for On the back of the TAOS pellet stove you will find a operation of the stove in the HEAT mode. (operation... -
Page 26: Accessories
84.20.00004 aluflex Ø 50 mm, per meter Stove pipes steel black 53.22.01100 Cone extender, has to be used with TAOS, between cone and chimney! 53.22.01008 Connector pipe steel black Ø 100 mm, exit vertically Ø 100 mm, clean-out right 53.22.00109 Connector pipe steel black Ø... -
Page 27: Spare Parts List
52.57.00041 Lower convection grate Art Nr. 52.57.00151 Upper convection grate Art Nr. 52.57.00156 Front, painted steel, sliver, for TAOS I Art Nr. 52.57.00200 Front, polished steel, sliver, for TAOS II Art Nr. 52.57.00202 Front, steatite, for TAOS III Art Nr. -
Page 28: Warranty/ Customer Service
Scope of warranty and of liability Excluded from the warranty and/or guaranty are: To enable us to provide our free service in case of a defect during the warranty period, warranty claims, Minor deviations of the product regarding the sent us a copy of the “report of system acceptance” dimensions, the colour or the design compared and a copy of the invoice, in order to ensure to images or specifications in our catalogues,... -
Page 29: Service Logbook
Service logbook Please store a copy of the “report of system acceptance” together with this continually updated service logbook The service has to be executed by a certified partner. (Querformat) Signature or stamp Other remarks Flame Auger Chimney connection Electronic components Door position Sealing Cleaning exhaust ducts... -
Page 31: Specifications
Date of initial commissioning: Height 1040 mm Width 565 mm Depth 580 mm Weight TAOS with steel front 152 kg 158 kg Weight TAOS with steatite front Smoke discharge tube diameter 100 mm Heating performance range approximately 2,4 - 8 kW... - Page 32 Rüegg Cheminée AG Rüegg Kamine GmbH Schwäntenmos 4 Biergasse 7 8126 Zumikon 4616 Weisskirchen Schweiz Österreich Tel. +41 (0)44 919 82 82 Tel. +43 (0)7243 56946 Fax +41 (0)44 919 82 90 Fax +43 (0)7243 56946 10 info@ch.ruegg-cheminee.com info@at.ruegg-cheminee.com Rüegg Cheminées S.A.S...
Need help?
Do you have a question about the TAOS and is the answer not in the manual?
Questions and answers