Samsung SMT-C7140 User Manual page 94

Step 2-Channel Scan
The STB shall carry out a channel scan in order to populate its channel database.
- Set the appropriate settings for each of the items (Frequency/Network ID/
Modulation/Symbol rate) You can get the settings from the service provider.
- After successfully scanning, the results screen shall be shown indicating the
numbers of TV and radio channels found.
- Press the OK button to confirm and move to the next screen.
Step 3-New Software
In this step, the STB shall check for a software update.
- If a software update is detected, select Yes and press OK button to proceed the
SW upgrade.
When the SW upgrade is finished, the STB shall reboot to apply the new SW.
- If the software update is not detected, the Installation Wizard shall complete.
27
English _