This package contains: One ST-PTZMINI-10XTA vandal proof intelligent dome color camera One installation manual Note: The ST-PTZMINI-10XTA requires a minimum 12VDC 700mA power supply such as the ST-PS12VDC1A or ST-PS12VDC2A. PRODUCT DESCRIPTION The ST-PZMINI-10XTA is a professional grade, IP-66 rated outdoor dome color camera with pan, tilt and zoom (PTZ) capability.
INSTALLATION AND OPERATION This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock.
4. WIRING CONNECTIONS a. Connect the power supply’s DC plug to the camera’s power outlet. b. Connect the camera to the monitor with a 75Ω coaxial video cable. c. Connect unshielded twisted pair (UTP) control cable between the camera’s RS485 port and the PTZ controller.
Page 5
5. SETTING CAMERA ADDRESS, PROTOCOL and BAUD RATE USING DIP-SWITCHES v2.2 8/11/11...
Page 6
Setting Camera Baud Rate: DIP-Switches 7, 8 Baud Rate Switch 7 8 1200bps 2400bps 4800bps 9600bps Setting Camera Protocol: DIP-Switch 9 Protocol Switch 9 PELCO-P PELCO-D Setting RS485 Terminal Resistance: DIP-Switch 0 RS485 Resistance Switch 0 Connect to 120Ω Resistor No Connection to 120Ω...
Clear Preset Point Numbers: Preset No. Function 1 – 32 Clear Preset Point Clear Home Point Clear Left Limited Point Clear Right Limited Point GoTo Preset Point Number: Preset No. Function 1 – 32 GoTo Preset Point GoTo Pan Zero Point GoTo Home Point GoTo Left Limited Point GoTo Right Limited Point...