WPS(PBC) Network Setup
■
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1. Go to
Network Setting
(MENUm
Settings
2. Select WPS(PBC), press ENTERE, and
▶
then press
3. Press the WPS(PBC) button on your router
within 2 minutes. Your TV automatically
acquires all the network setting values it
needs and connects to your network.
4. The network connection screen appears, and network setup is done.
screen.
→
→
Network
Network
→ ENTERE).
ENTERE
again.
Network Settings
Select a network connection type.
Wired
Wireless (General)
WPS(PBC)
One Foot Connection
● The displayed image may differ depending on the
model.
English
Previous
Connect to the Wireless Router
Next
easily by pressing the WPS(PBC)
button. Choose this if your
Wireless Router supports Push
Cancel
▶
Button Configuration(PBC)